Your TV can see through walls
An article demonstrates how a standard TV signal receiver can detect motion, even through walls, by analyzing subtle disturbances caused by reflections. It shows how changes in signal phase due to movement create 'stripes' in a spectrogram, allowing for the calculation of a person's speed. The author notes that similar principles apply to other wideband radio signals like WiFi or LTE.
Why it matters
This illustrates a novel application of existing radio technology for passive motion detection, potentially opening doors for low-cost sensing systems in security, health monitoring, or smart home applications without specialized equipment.
This is a spectogram of the signal from a local TV station:
ATSC digital TV signal. (Recorded using an Ettus USRP B200)
Walking between the receiver and TV station causes a slight disturbance to the signal, but it's nothing to write home about:
For this capture, I moved the antenna a few centimeters:
This is selective fading : The direct signal is being canceled out by a strong reflection. Because the phase of the reflection depends on frequency, this effect is not uniform over the whole signal. Apart from being annoying if you're trying to watch TV, this state is extremely sensitive to any nearby movement.
Here's what happened to the signal when I got up from my chair:
... and here's me walking around in a neighboring room:
Get smarter about the news
Sign up free for a feed built around what you actually care about, Dive Deeper research on any story, and the full text of every article.
Create free accountAlready have an account? Sign in