Article may be outdated

This article is 14 days old. Some details may have changed since publication.

Hacker News·5 min read·hard

Stringman, an $800 open-source room scale gripper robot

N
nharada
Stringman, an $800 open-source room scale gripper robot
✦AI Summary

Stringman is an $800 open-source, room-scale gripper robot that uses a ceiling-anchored cable system to navigate cluttered environments. It features local-only control and AI processing to ensure user privacy and hardware autonomy.

Why it matters

This project demonstrates a low-cost, high-reach alternative to traditional wheeled or legged robots, emphasizing open-source hardware and data privacy.

✦Dive DeeperCreate a free account to unlock

In robotics, price is basically actuator count. Stringman reaches an entire room with four motors, hanging its gripper from lines anchored in the ceiling corners. Working from above, it reaches floors too cluttered for any wheeled or legged robot. And since the lifting force is shared by all motors, payload capacity scales with their combined torque instead of a single actuator's, peaking near the center of the room where the lines share the load most evenly.

* 0.75 m serial arm using the same DM-H6215 1 N·m direct drive actuators at rated torque, ignoring the weight of its own links. Stringman figure is for a 7 × 7 × 3 m room at the 28 N line tension limit, net of its 638 g gripper and marker.

Stringman is open source and OSHWA certified . The mechanical CAD, the PCBs , and the control software are all published.

Continue reading on Headlinne

Create a free account to read the full article.

Read full article →
technologystartups
✦

Get smarter about the news

Sign up free for a feed built around what you actually care about, Dive Deeper research on any story, and the full text of every article.

Create free account

Already have an account? Sign in